Produkty
Regulátor TMM 0710-3 EXPERT 7A/12V
Pro proudy do 7A z jednoho až tří článků LiPol.
Brushless speed controller for aircraft models (for brushless motors).
Suitable for motors:
For 2 to 20 pole motors of classical conception (rotor inside) and also for outrunners (rotor is on the outer side).
(Mega AC, Model Motors, MP JET, PJS, Überall model, Hacker, Kontronik, LRK, Plettenberg, etc.)
| Dimensions (with external capacitor) [mm]: | 22×18×4,5 | |
| Weight without power conductors: | 3,5 g | |
| Weight incl. all conductors: | 5,5 g | |
| Power cables: | 0,5 mm2 | |
| Length of the power cables: | 70 mm | |
| JR gold servoconnector, servocable: | 0,15 mm2 | |
| Number of NiCd / NiMh feeding cells: | 3 up to 10 | |
| Number of Li-Ion, Li-Pol feeding cells: | 1 up to 3 | |
| Max. continuous current (for full throttle): | 7 A | |
| Max. current for full throttle (peak 5 sec.): | 10 A | |
| Number of regulation steps: | 1024 | |
| Switching frequency of the motor (PWM): | 8 kHz | |
| On-state switch resistance at 25 °C: | 2×18 mOhm | |
| Version: | BEC | |
| BEC voltage: | 5V / 3,7V | |
| max. BEC current for 25 °C: | 4 A | |
| Programming with transmitter: | yes | |
| Programming with computer (PC): | yes | |
| Data reading from controller: | yes |
Recommended use:
Aircraft, gliders, for motor with or without gearbox.
Automatically programmed parameters:
Parameters of control signal, number (only NiCd/NiMH) and quality of cells, current fuse, cut off voltage.
Programmable parameters:
See PDF manual.
Note:
Weight of the controller with switch is 2 grams higher.
Prodejní cena regulátoru bez vypínače je 1398.- Kč.